SPORTEC® fusion classic

Preventing injury and damage to joints in indoor sports facilities

SPORTEC® fusion classic consists of a technically advanced elastic layer made from SPORTEC® standard material and a tried and tested SPORTEC® UNI classic floor covering. This combination prevents damage to joints and other injuries and is therefore particularly recommended for indoor sports facilities in schools, leisure centres and multi-purpose buildings. The elastic layer and the top layer are delivered as pre-fabricated double-layer rolls. Less time is required during installation, because only the adhesion of the floor covering must be performed on the substrate.


SPORTEC fusion classic

Technical Data

Material
Top layer: Fine-grain EPDM colour granules bonded with PU-elastomer.
Elastic layer: Fine-grain recycled tyre rubber granules bonded with PU-elastomer.
Colour(s)
red, blue
(other colours on request)
low colour differences are conditional of material
Surface
SPORTEC® UNI classic (fine-grain)
Lower side
SPORTEC® standard
Note
The elastic layer and the top layer are delivered as pre-fabricated double-layer rolls.
Thickness(es)
8 mm (± 0.6 mm)
Roll width
1,250 mm (± 1.5 %)
Roll length
15 m ( 1.5 %)

Downloads

Data sheet PDF
Installation instruction PDF
Cleaning and care instruction PDF