SPORTEC® fusion
Preventing injury and damage to joints in indoor sports facilities
SPORTEC® fusion consists of a technically advanced elastic layer made from SPORTEC® standard material and a tried and tested SPORTEC® UNI classic or SPORTEC® purcolor floor covering. This combination prevents damage to joints and other injuries and is therefore particularly recommended for indoor sports facilities in schools, leisure centres and multi-purpose buildings. The elastic layer and the top layer are delivered as pre-fabricated double-layer rolls. Less time is required during installation, because only the adhesion of the floor covering must be performed on the substrate.

Colour(s)
purcolor light grey

purcolor blue

purcolor red

Technical Data
Material |
Top layer: Fine-grain EPDM colour granules bonded with PU-elastomer. Elastic layer: Fine-grain recycled tyre rubber granules bonded with PU-elastomer. |
Note |
The elastic layer and the top layer are delivered as pre-fabricated double-layer rolls. |
Thickness(es) |
8 mm (± 0.6 mm) |
Roll width |
1,250 mm (± 1.5 %) |
Roll length |
15 m (± 1.5 %) |
VOC emission rating |
French VOC Regulation (A+) |
Downloads
Data sheet PDFInstallation instruction PDF
Cleaning and care instruction PDF
You are currently viewing placeholder content. To access the actual content, click on the button below. Please note that data will be passed on to third-party providers.
Further information