KARGOTEC® protect

Anti-slip mat with extremely high kinetic friction coefficient

Our anti-slip mat KARGOTEC® protect, with an extremely high kinetic friction coefficient of at least μ=0.9 (practical calculation value: μ=0.6; details brochure page 3), is the ideal solution, because it optimally counters any horizontal movement of the load (sliding). Due to the especially homogeneous distribution of the granules, KARGOTEC® protect also provides maximum flexibility, with excellent adaptation to loads that have complex contours and prevention of staining on many substrates. The large range of available thicknesses ensures especially effective and economical securing of loads. As with all KARGOTEC® anti-slip mats, KARGOTEC® protect can be reused many times until they reach the replacement state of wear.

KARGOTEC protect

Technical Data

Recycled rubber granules, bonded with polyurethane
Length (slabs)
available on request
Width (slabs)
available on request
Thickness (slabs)
available on request
Length (rolls)
as ordered (± 1.5 %)
Width (rolls)
1250 mm (± 1.5 %)
Thickness (rolls)
3, 6, 8, 10mm (± 0.5 mm)
12 mm (± 1.0 mm)
Coefficient of sliding friction
Tested value: μ=0.9* at 3, 5, 6, 8, 10 mm thickness
(* Friction partners: Euro pallet, non-slip floor, dry)
Practical calculation value: μ=0.6 (details brochure page 3)
Maximum permissible compressive load
approx. 270.0 t/m²
for thicknesses of 3, 5, 6, 8, 10 mm**


Data sheet PDF