KRAITEC® step roof FPO
KRAITEC® step with extruded plastic sheeting for flat roofs
KRAITEC® step roof FPO is a protective mat made of rubber granules with an FPO backing; it is designed for use on flat roofs with an FPO foil covering as a walkway for maintenance, inspection and installation . KRAITEC® step roof FPO is also used as a protective layer under roof structures (e.g. solar and antenna systems). KRAITEC® step roof FPO features an FPO backing with an integrated fleece layer. The FPO coating enables permanent bonding to the FPO roofing felt by means of hot-air welding to prevent lifting or slipping.
Certifications
Technical Data
| Material |
| Polyurethane-bonded recycled rubbergranulate with FPO cladding (PP) on the bottom.(typical rubber smell possible) |
| Colour |
| red, green, grey or black (slight material-related colour variations possible) |
| Surface |
| smooth with open pores, bevelled edges |
| Lower side |
| FPO-cladding with drainage channels |
| Length x Width x Thickness |
| 500 mm x 500 mm, 30 mm |
| Tolerances |
| length and width ± 1.5 %, thickness ± 2 mm |
| Weight slab |
| approx. 5.3kg |
Downloads
Data sheet PDFInstallation instruction PDF
Applications of this product
Installation of KRAITEC® step roof PVC/FPO using the hot-air welding method
You are currently viewing placeholder content. To access the actual content, click on the button below. Please note that data will be passed on to third-party providers.